array( 'it' => 'Torna ai tavoli.', 'en' => 'Back to tables.' ), 'warrrepl' => array( 'it' => '
Il nominativo è stato inoltrato all\'amministratore.

Nell\'arco di pochi giorni verrà

notificata al garantito l\'avvenuta registrazione.', 'en' => '
The subscription was forwarded to the administrator.

In a few days we will notify

your friend the occurred registration.'), 'btn_close' => array( 'it' => 'chiudi', 'en' => 'close' ), 'commerr' => array( 'it' => 'E\' occorso un errore durante il salvataggio, riprova o contatta l\'amministratore.', 'en' => 'An error was occurred during the saving, try again or contact the administrator.'), 'coerrdb' => array( 'it' => 'Il database è temporaneamente irraggiungibile, riprova più tardi o contatta l\'amministratore.', 'en' => 'The database is temporarly unavailable, retry to later or conctact the administrator.'), 'warrmust' => array( 'it' => 'Per autenticare qualcuno devi a tua volta essere autenticato.', 'en' => 'To authenticate somebody you have to be authenticated in your turn'), 'mesgrepl' => array( 'it' => '

Il messaggio è stato inoltrato all\'amministratore.', 'en' => '

The message was forwarded to the administrator'), 'mesgmust' => array( 'it' => 'Per mandare messaggi all\'amministratore devi essere autenticato.', 'en' => 'To send a message to the administrator you have to be authenticated'), 'shutmsg' => array( 'it' => 'Il server sta per essere riavviato, non possono avere inizio nuove partite.', 'en' => 'The server is going to be rebooted, new games are not allowed.'), 'mustauth' => array( 'it' => 'Il tavolo a cui volevi sederti richiede autentifica.', 'en' => 'the table where you want to sit require authentication'), 'tabwait_a'=> array( 'it' => 'Il tavolo si è appena liberato, ci si potrà sedere tra ', 'en' => 'The table is only just opened, you will sit down in '), // FIXME 'tabwait_b'=> array( 'it' => ' secondi.', 'en' => ' seconds.'), 'mustfirst'=> array( 'it' => 'Il tuo utente può sedersi al tavolo solo per primo.', 'en' => 'Your can sit down as first user only.' ), 'pollmust' => array( 'it' => 'Per partecipare al sondaggio devi essere autenticato.', 'en' => 'To vote for the poll you have to be authenticated'), 'pollnone' => array( 'it' => '

Al momento non è attivo alcun sondaggio.', 'en' => '

At this moment no polls are active.'), 'pollchoo' => array( 'it' => '

Non hai espresso nessuna preferenza.', 'en' => '

You don\'t choose any preference, do it'), 'pollagai' => array( 'it' => '
Per questo sondaggio hai già votato.

Non si può esprimere la propria preferenza più di una volta.', 'en' => '
You just express your preference about this poll.

You cannot do it again.'), 'pollrec' => array ('it' => '

Il tuo voto è stato registrato.', 'en' => '

Your vote had be stored.'), 'badwake_a'=> array( 'it' => '
Ti sei alzato da un tavolo senza il consenso degli altri giocatori.

Dovrai aspettare ancora ', 'en' => '
You stand up without the permission of the other players.

You will wait '), 'badwake_b'=> array( 'it' => ' prima di poterti sedere nuovamente.', 'en' => ' before you can sit down again.'), 'btn_stays'=> array( 'it' => 'resta in piedi.', 'en' => 'stay standing.'), 'badsit_a' => array( 'it' => '
Tu o qualcuno col tuo stesso indirizzo IP si è alzato da un tavolo senza il consenso degli altri giocatori.

Dovrai aspettare ancora ', 'en' => '
You or someone with your same IP address is standing up from a table without the permission of the other players

You will wait '), 'badsit_b' => array( 'it' => ' prima di poterti sedere nuovamente.

Se non sei stato tu ad alzarti e possiedi un login con password, autenticandoti con quello, potrai accedere.', 'en' => ' before you can sit down again. If you don\'t leave the table and you have a login with a password, authenticating with this one you will access'), 'nu_msubj' => array( 'it' => 'Brisk: verifica email', 'en' => 'Brisk: email verification'), // %s(guar) %s(login) %s(baseurl) %d(code) %s(hash) 'nu_mtext' => array( 'it' => 'Ciao, sono l\' amministratore del sito di Brisk. L\' utente \'%s\' ha garantito per te col nickname \'%s\', vai al link: %s per confermare il tuo indirizzo di posta elettronica. Ciò è necessario per ottenere la password. Saluti e buone partite, mop.', 'en' => 'EN mtext [%s] [%s] [%s]'), 'nu_mhtml' => array( 'it' => 'Ciao, sono l\' amministratore del sito di Brisk.

L\' utente \'%s\' ha garantito per te col nickname \'%s\',
clicca qui per confermare il tuo indirizzo di posta elettronica.

Ciò è necessario per ottenere la password.

Saluti e buone partite, mop.
', 'en' => 'EN mhtml [%s] [%s] [%s]'), 'nu_gtext' => array( 'it' => 'Ciao %s, sono l\' amministratore del sito di Brisk. Ti volevo avvisare che ho attivato i login di \'%s\' che hai garantito. Ti ricordo che i login vanno dati a persone di fiducia, se 3 di quelli che hai autenticato verranno segnati come molestatori verrà sospeso anche il tuo accesso. Grazie dell\' impegno, mop.', 'en' => 'EN nu_gtext [%s][%s]'), 'nu_ghtml' => array( 'it' => 'Ciao %s, sono l\' amministratore del sito di Brisk.

Ti volevo avvisare che ho attivato i login di \'%s\' che hai garantito.

Ti ricordo che i login vanno dati a persone di fiducia, se 3 di quelli che hai autenticato verranno segnati come molestatori verrà sospeso anche il tuo accesso.

Grazie dell\' impegno, mop.', 'en' => 'EN nu_ghtml [%s][%s]') ); define('LICMGR_CHO_ACCEPT', 0); define('LICMGR_CHO_REFUSE', 1); define('LICMGR_CHO_AFTER', 2); function index_wr_main(&$brisk, $remote_addr_full, $get, $post, $cookie) { GLOBAL $G_domain, $G_webbase, $G_mail_seed; GLOBAL $G_shutdown, $G_alarm_passwd, $G_black_list, $G_lang, $G_room_help, $G_room_about; GLOBAL $G_room_passwdhowto, $mlang_indwr; GLOBAL $G_tos_vers; $remote_addr = addrtoipv4($remote_addr_full); log_load("index_wr.php"); if (($mesg = gpcs_var('mesg', $get, $post, $cookie)) === FALSE) unset($mesg); if (($sess = gpcs_var('sess', $get, $post, $cookie)) === FALSE) $sess = ""; if (DEBUGGING == "local" && $remote_addr != '127.0.0.1') { echo "Debugging time!"; return (FALSE); } /* * MAIN */ /* if the IP is banned, exit without do nothing */ if (array_search($remote_addr, $G_black_list) !== FALSE) { // TODO: find a way to add a nonblocking sleep(5) here return (FALSE); } $is_spawn = FALSE; log_wr(0, 'index_wr.php: COMM: '.xcapemesg($mesg)); log_wr('COMM: '.xcapemesg($mesg)); $curtime = time(); $dt = date("H:i ", $curtime); if (($user = $brisk->get_user($sess, &$idx)) == FALSE) { $argz = explode('|', xcapemesg($mesg)); if ($argz[0] == 'getchallenge') { if (isset($get['cli_name'])) $cli_name = $get['cli_name']; if (($a_sem = Challenges::lock_data(TRUE)) != FALSE) { log_main("chal lock data success"); if (($chals = &Challenges::load_data()) != FALSE) { $token = uniqid(""); // echo '2|'.$argz[1].'|'.$token.'|'.$remote_addr.'|'.$curtime.'|'; // exit; if (($login_new = validate_name(urldecode($cli_name))) != FALSE) { if ($chals->add($login_new, $token, $remote_addr, $curtime) != FALSE) { log_send("SUCCESS: token:".$token); echo '0|'.$token; } else { log_send("getchallenge FAILED"); echo '1|'; } } else { log_send("getchallenge FAILED"); echo '1|'; } if ($chals->ismod()) { Challenges::save_data(&$chals); } } Challenges::unlock_data($a_sem); } else { echo "CHALLENGE LOCK FAILED\n"; return FALSE; } } else if ($argz[0] == 'auth') { printf("challenge|ok"); } else if ($argz[0] == 'help') { /* MLANG: "torna ai tavoli" */ echo show_notify(str_replace("\n", " ", $G_room_help[$G_lang]), 0, $mlang_indwr['btn_close'][$G_lang], 600, 500); } else if ($argz[0] == 'about') { echo show_notify(str_replace("\n", " ", $G_room_about[$G_lang]), 0, $mlang_indwr['btn_close'][$G_lang], 400, 230); } else if ($argz[0] == 'passwdhowto') { echo show_notify(str_replace("\n", " ", $G_room_passwdhowto[$G_lang]), 0, $mlang_indwr['btn_close'][$G_lang], 400, 200); } else if ($argz[0] == 'roadmap') { echo show_notify(str_replace("\n", " ", $G_room_roadmap[$G_lang]), 0, $mlang_indwr['btn_close'][$G_lang], 400, 200); } else if ($argz[0] == 'placing') { require_once("briskin5/Obj/briskin5.phh"); require_once("briskin5/Obj/placing.phh"); echo show_notify(str_replace("\n", " ", placings_show(FALSE)), 0, $mlang_indwr['btn_close'][$G_lang], 800, 600); } else if ($argz[0] == 'whysupport') { echo show_notify(str_replace("\n", " ", $G_room_whysupport[$G_lang]), 0, $mlang_indwr['btn_close'][$G_lng], 400, 200); } else { log_wr("Get User Error"); echo "Get User Error:" + $argz[0]; return FALSE; } return TRUE; } // end if (($user = $brisk->get_user($sess, ... == FALSE) { $brisk->sess_cur_set($user->sess); $argz = explode('|', xcapemesg($mesg)); log_wr('POSTSPLIT: '.$argz[0]); // LACC UPDATED $user->lacc = $curtime; if (array_search($user->ip, $G_black_list) !== FALSE) { // TODO: find a way to add a nonblocking sleep(5) here return (FALSE); } if ($argz[0] == 'ping') { log_wr("PING RECEIVED"); } else if ($argz[0] == 'prefs') { if ($argz[1] == 'save') { if (!isset($post['prefs'])) { return FALSE; } if (($prefs = Client_prefs::from_json($post['prefs'])) == FALSE) { $prefs = Client_prefs::from_user($user); } $prefs->store($user, TRUE); } else { // reset case as default $prefs = Client_prefs::from_user($user); } $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= sprintf('prefs_load(\'%s\', true, %s);', json_encode($prefs), 'false'); $user->step_inc(); if ($argz[1] == 'save') { if ($user->stat == 'room' && $user->subst == 'standup') { $brisk->standup_update($user); } else if ($user->stat == 'room' && $user->subst == 'sitdown') { log_main("chatt_send pre table update"); $brisk->table_update($user); log_main("chatt_send post table update"); } } echo "1"; return TRUE; } else if ($argz[0] == 'shutdown') { log_auth($user->sess, "Shutdown session."); $user->reset(); log_rd2("AUTO LOGOUT."); if ($user->subst == 'sitdown' || $user->stat == 'table') $brisk->room_wakeup($user); else if ($user->subst == 'standup') $brisk->room_outstandup(&$user); else { log_rd2("SHUTDOWN FROM WHAT ???"); } } else if ($argz[0] == 'warranty') { if (($cli_name = gpcs_var('cli_name', $get, $post, $cookie)) === FALSE) $cli_name = ""; if (($cli_email = gpcs_var('cli_email', $get, $post, $cookie)) === FALSE) $cli_email = ""; $mesg_to_user = ""; log_wr("INFO:SKIP:argz == warranty name: [".$cli_name."] AUTH: ".($user->flags & USER_FLAG_AUTH)); if ($user->flags & USER_FLAG_AUTH) { if (0 == 1) { if (($wa_lock = Warrant::lock_data(TRUE)) != FALSE) { if (($fp = @fopen(LEGAL_PATH."/warrant.txt", 'a')) != FALSE) { /* Unix time | session | nickname | IP | where was | mesg */ fwrite($fp, sprintf("%ld|%s|%s|%s|\n", $curtime, xcapelt($user->name), xcapelt(urldecode($cli_name)), xcapelt(urldecode($cli_email)))); fclose($fp); } Warrant::unlock_data($wa_lock); $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; /* MLANG: "
Il nominativo è stato inoltrato all\'amministratore.

Nell\'arco di pochi giorni vi verrà

notificata l\'avvenuta registrazione." */ $user->comm[$user->step % COMM_N] .= show_notify($mlang_indwr['warrrepl'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 150); $user->step_inc(); echo "1"; } else { /* MLANG: "E\' occorso un errore durante il salvataggio, riprova o contatta l\'amministratore." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['commerr'][$G_lang]); } } // 0 == 1 else { // check existence of username or email $is_trans = FALSE; do { if (($bdb = BriskDB::create()) == FALSE) break; $cli_name = urldecode($cli_name); $cli_email = urldecode($cli_email); // check for already used fields if (($idret = $bdb->check_record_by_login_or_email($cli_name, $cli_email)) != 0) { $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, ($idret == 1 ? "login già in uso" : ($idret == 2 ? "email già utilizzata" : "errore sconosciuto")) ); break; } $bdb->transaction('BEGIN'); $is_trans = TRUE; // insert the new user disabled with reason NU_MAILED if (($usr_obj = $bdb->user_add($cli_name, 'THE_PASS', $cli_email, USER_FLAG_TY_DISABLE, USER_DIS_REA_NU_MAILED, $user->code)) == FALSE) { fprintf(STDERR, "ERROR: user_add FAILED\n"); break; } if (($mail_code = $bdb->mail_reserve_code()) == FALSE) { fprintf(STDERR, "ERROR: mail reserve code FAILED\n"); break; } $hash = md5($curtime . $G_alarm_passwd . $cli_name . $cli_email); $confirm_page = sprintf("http://%s/%s/mailmgr.php?f_act=checkmail&f_code=%d&f_hash=%s", $G_domain, $G_webbase, $mail_code, $hash); $subj = $mlang_indwr['nu_msubj'][$G_lang]; $body_txt = sprintf($mlang_indwr['nu_mtext'][$G_lang], $user->name, $cli_name, $confirm_page); $body_htm = sprintf($mlang_indwr['nu_mhtml'][$G_lang], $user->name, $cli_name, $confirm_page); $mail_item = new MailDBItem($mail_code, $usr_obj->code, MAIL_TYP_CHECK, $curtime, $subj, $body_txt, $body_htm, $hash); if (brisk_mail($cli_email, $subj, $body_txt, $body_htm) == FALSE) { // mail error fprintf(STDERR, "ERROR: mail send FAILED\n"); break; } // save the mail if ($mail_item->store($bdb) == FALSE) { // store mail error fprintf(STDERR, "ERROR: store mail FAILED\n"); break; } $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; /* MLANG: "
Il nominativo è stato inoltrato all\'amministratore.

Nell\'arco di pochi giorni vi verrà

notificata l\'avvenuta registrazione." */ $user->comm[$user->step % COMM_N] .= show_notify($mlang_indwr['warrrepl'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 150); $user->step_inc(); echo "1"; $bdb->transaction('COMMIT'); } while(FALSE); $bdb->transaction('ROLLBACK'); } } else { /* MLANG: "Per autenticare qualcuno devi a tua volta essere autenticato." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['warrmust'][$G_lang]); } if ($mesg_to_user != "") { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= $mesg_to_user; $user->step_inc(); } } else if ($argz[0] == 'mesgtoadm') { if (($cli_subj = gpcs_var('cli_subj', $get, $post, $cookie)) === FALSE) $cli_subj = ""; if (($cli_mesg = gpcs_var('cli_mesg', $get, $post, $cookie)) === FALSE) $cli_mesg = ""; $mesg_to_user = ""; log_wr("INFO:SKIP:argz == mesgtoadm name: [".$user->name."] AUTH: ".($user->flags & USER_FLAG_AUTH)); if ($user->flags & USER_FLAG_AUTH) { if (($wa_lock = Warrant::lock_data(TRUE)) != FALSE) { if (($bdb = BriskDB::create()) != FALSE) { $bdb->users_load(); if (($ema = $bdb->getmail($user->name)) != FALSE) { // mail("nastasi", mail("brisk@alternativeoutput.it", urldecode($cli_subj), urldecode($cli_mesg), sprintf("From: %s <%s>", $user->name, $ema)); } if (($fp = @fopen(LEGAL_PATH."/messages.txt", 'a')) != FALSE) { /* Unix time | session | nickname | IP | where was | mesg */ fwrite($fp, sprintf("%ld|%s|%s|%s\n", $curtime, $user->name, xcapelt(urldecode($cli_subj)), xcapelt(urldecode($cli_mesg)))); fclose($fp); } Warrant::unlock_data($wa_lock); $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; /* MLANG: "" */ $user->comm[$user->step % COMM_N] .= show_notify($mlang_indwr['mesgrepl'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 110); $user->step_inc(); echo "1"; } else { /* MLANG: "Il database è temporaneamente irraggiungibile, riprova più tardi o contatta l\'amministratore." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['coerrdb'][$G_lang]); $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; } } else { /* MLANG: "E\' occorso un errore durante il salvataggio, riprova o contatta l\'amministratore." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['commerr'][$G_lang]); } } else { /* MLANG: "Per autenticare qualcuno devi a tua volta essere autenticato." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['mesgmust'][$G_lang]); } if ($mesg_to_user != "") { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= $mesg_to_user; $user->step_inc(); } } else if ($argz[0] == 'poll') { GLOBAL $G_with_poll, $G_poll_name; if (($cli_choose = gpcs_var('cli_choose', $get, $post, $cookie)) === FALSE) $cli_choose = ""; if (($cli_poll_name = gpcs_var('cli_poll_name', $get, $post, $cookie)) === FALSE) $cli_poll_name = ""; $poll_lock = FALSE; $mesg_to_user = ""; $fp = FALSE; $echont = "0"; /* DONE - autorizzato ? DONE - ci sono poll attivi ? - verifica che il poll_name del client sia uguale a quello sul server DONE - lock DONE - apro file r+ con fallback in w+ DONE - vedo se ha già votato DONE - se si: messaggio di voto già dato se no: accetto il voto e lo segno; messaggio chiudo file */ $dobreak = FALSE; do { log_wr("INFO:SKIP:argz == poll name: [".$cli_poll_name."] AUTH: ".($user->flags & USER_FLAG_AUTH)); if (($user->flags & USER_FLAG_AUTH) != USER_FLAG_AUTH) { // MLANG: Per partecipare al sondaggio devi essere autenticato. $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['pollmust'][$G_lang]); log_wr("break1"); break; } if ($G_with_poll == FALSE && $G_poll_name != FALSE && $G_poll_name != "") { $mesg_to_user = show_notify($mlang_indwr['pollnone'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 110); log_wr("break2"); break; } if ($cli_choose == "" || !isset($cli_choose)) { $mesg_to_user = show_notify($mlang_indwr['pollchoo'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 110); log_wr("break2.5"); break; } if (($poll_lock = Poll::lock_data(TRUE)) == FALSE) { /* MLANG: "E\' occorso un errore durante il salvataggio, riprova o contatta l\'amministratore." */ $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['commerr'][$G_lang]); log_wr("break3"); break; } if (($fp = @fopen(LEGAL_PATH."/".$G_poll_name.".txt", 'r+')) == FALSE) $fp = @fopen(LEGAL_PATH."/".$G_poll_name.".txt", 'w+'); if ($fp == FALSE) { $mesg_to_user = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['commerr'][$G_lang]); log_wr("break4"); break; } log_wr("poll: cp"); fseek($fp, 0); log_wr("poll: cp2"); while (!feof($fp)) { log_wr("poll: cp3"); $bf = fgets($fp, 4096); log_wr("poll: cp3.1"); $arli = csplitter($bf, '|'); if (count($arli) == 0) break; log_wr("poll: cp3.2"); if (strcasecmp($arli[1], $user->name) == 0) { $mesg_to_user = show_notify($mlang_indwr['pollagai'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 110); $dobreak = TRUE; break; } } log_wr("poll: cp4"); if ($dobreak) { log_wr("break5"); break; } /* Unix time | nickname | choose */ fwrite($fp, sprintf("%ld|%s|%s\n", $curtime, xcapelt($user->name), xcapelt(urldecode($cli_choose)))); fflush($fp); $mesg_to_user = show_notify($mlang_indwr['pollrec'][$G_lang], 0, $mlang_indwr['btn_close'][$G_lang], 400, 110); $echont = "1"; log_wr("poll: cp5"); } while (0); if ($fp != FALSE) fclose($fp); if ($poll_lock != FALSE) Poll::unlock_data($poll_lock); if ($mesg_to_user != "") { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= $mesg_to_user; $user->step_inc(); } echo "$echont"; } /****************** * * * STAT: room * * * ******************/ else if ($user->stat == 'room') { $user->laccwr = time(); if ($argz[0] == 'help') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify(str_replace("\n", " ", $G_room_help[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], 600, 500); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'passwdhowto') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify(str_replace("\n", " ", $G_room_passwdhowto[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], 600, 500); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'splash') { GLOBAL $G_with_splash, $G_splash_content, $G_splash_interval, $G_splash_idx; GLOBAL $G_splash_w, $G_splash_h, $G_splash_timeout; $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify_ex(str_replace("\n", " ", $G_splash_content[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], $G_splash_w, $G_splash_h, true, 0); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'about') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify(str_replace("\n", " ", $G_room_about[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], 400, 200); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'placing') { require_once("briskin5/Obj/briskin5.phh"); require_once("briskin5/Obj/placing.phh"); $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify_ex(str_replace("\n", " ", placings_show($user)), 0, $mlang_indwr['btn_backtotab'][$G_lang], 800, 600, TRUE, 0); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'roadmap') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify(str_replace("\n", " ", $G_room_roadmap[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], 400, 200); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'whysupport') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= show_notify(str_replace("\n", " ", $G_room_whysupport[$G_lang]), 0, $mlang_indwr['btn_backtotab'][$G_lang], 400, 200); log_wr($user->comm[$user->step % COMM_N]); $user->step_inc(); } else if ($argz[0] == 'chatt') { $brisk->chatt_send(&$user, xcapemesg($mesg)); } else if ($argz[0] == 'tosmgr') { // check IF is authnticated user, both terms of service versions matches if ($user->flags & USER_FLAG_AUTH && count($argz) == 5) { $f_type = $argz[1]; $f_code = $argz[2]; $f_tos_curr = $argz[3]; $f_tos_vers = $argz[4]; if ("$f_tos_curr" == $user->rec->tos_vers_get() && "$f_tos_vers" == "$G_tos_vers") { if ("$f_type" == "soft" || "$f_type" == "hard") { $res = 100; switch ($f_code) { case LICMGR_CHO_ACCEPT: $user->rec->tos_vers_set($G_tos_vers); $res = $user->tos_store(); break; case LICMGR_CHO_REFUSE: $user->flags_set(USER_FLAG_TY_DISABLE, USER_FLAG_TY_ALL); $user->rec->disa_reas_set(USER_DIS_REA_LICENCE); $res = $user->state_store(); $user->comm[$user->step % COMM_N] = $user->blocking_error(TRUE); $user->the_end = TRUE; $user->step_inc(); break; } } } } } /********************** * * * SUBST: standup * * * **********************/ else if ($user->subst == 'standup') { if ($argz[0] == 'sitdown') { log_wr("SITDOWN command"); if ($user->the_end == TRUE) { log_wr("INFO:SKIP:argz == sitdown && ->the_end == TRUE => ignore request."); return FALSE; } // Take parameters $table_idx = (int)$argz[1]; $table = &$brisk->table[$table_idx]; $not_allowed_msg = ""; if ($G_shutdown) { $not_allowed_msg = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['shutmsg'][$G_lang]); } else if ($table->wakeup_time > $curtime) { $not_allowed_msg = sprintf('chatt_sub("%s", [2, "%s"],"%s%d%s");', $dt, NICKSERV, $mlang_indwr['tabwait_a'][$G_lang], $table->wakeup_time - $curtime, $mlang_indwr['tabwait_b'][$G_lang]); } else if ($table->auth_only && (($user->flags & USER_FLAG_AUTH) == 0)) { $not_allowed_msg = sprintf('chatt_sub("%s", [2, "%s"],"%s");', $dt, NICKSERV, $mlang_indwr['mustauth'][$G_lang]); } else if ($user->flags & USER_FLAG_TY_FIRONLY && $table->player_n > 0) { $not_allowed_msg = sprintf('chatt_sub("%s", [2, "%s"], "%s");', $dt, NICKSERV, $mlang_indwr['mustfirst'][$G_lang]); } if ($not_allowed_msg != "") { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; ".$not_allowed_msg; $user->step_inc(); return TRUE; } /* TODO: refact to a function */ // if ($user->bantime > $user->laccwr) { require_once("Obj/hardban.phh"); if (($bantime = Hardbans::check(($user->flags & USER_FLAG_AUTH ? $user->name : FALSE), $user->ip, $user->sess)) != -1) { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; /* MLANG: "
Ti sei alzato da un tavolo senza il consenso degli altri giocatori.

Dovrai aspettare ancora ".secstoword($user->bantime - $user->laccwr)." prima di poterti sedere nuovamente.", "resta in piedi.", "
Tu o qualcuno col tuo stesso indirizzo IP si è alzato da un tavolo senza il consenso degli altri giocatori.

Dovrai aspettare ancora ".secstoword($bantime - $user->laccwr)." prima di poterti sedere nuovamente.

Se non sei stato tu ad alzarti e possiedi un login con password, autenticandoti con quello, potrai accedere." */ if ($user->flags & USER_FLAG_AUTH) { $user->comm[$user->step % COMM_N] .= show_notify($mlang_indwr['badwake_a'][$G_lang].secstoword($user->bantime - $user->laccwr).$mlang_indwr['badwake_b'][$G_lang], 2000, $mlang_indwr['btn_stays'][$G_lang], 400, 100); } else { $user->comm[$user->step % COMM_N] .= show_notify($mlang_indwr['badsit_a'][$G_lang].secstoword($bantime - $user->laccwr).$mlang_indwr['badsit_a'][$G_lang], 2000, $mlang_indwr['btn_stays'][$G_lang], 400, 180); } $user->step_inc(); return TRUE; } if ($table->player_n == PLAYERS_N) { log_wr("WARN:FSM: Sitdown unreachable, table full."); return FALSE; } // set new status $user->subst = "sitdown"; $user->table = $table_idx; $user->table_pos = $table->user_add($idx); log_wr("MOP before"); if ($table->player_n == PLAYERS_N) { require_once("briskin5/Obj/briskin5.phh"); log_wr("MOP inall"); // Start game for this table. log_wr("Start game!"); // // START THE SPAWN HERE!!!! // // Create new spawned table // $bin5_sem = Bin5::lock_data(TRUE, $table_idx); $table_token = uniqid(""); $brisk->table[$table_idx]->table_token = $table_token; $brisk->table[$table_idx]->table_start = $curtime; $plist = "$table_token|$user->table|$table->player_n"; for ($i = 0 ; $i < $table->player_n ; $i++) { $plist .= '|'.$brisk->user[$table->player[$i]]->sess; } log_legal($curtime, $user->ip, $user, "STAT:CREATE_GAME", $plist); log_wr("pre new Bin5"); if (($bin5 = new Bin5($brisk, $table_idx, $table_token, $get, $post, $cookie)) == FALSE) log_wr("bri create: FALSE"); else log_wr("bri create: ".serialize($bin5)); log_wr("pre init table"); // init table $bin5_table = $bin5->table[0]; $bin5_table->init($bin5->user); $bin5_table->game_init($bin5->user); // // Init spawned users. // // MULTIGAME: here init of selected game instead of hardcabled briskin5 init (look subst status) // log_wr("game_init after"); for ($i = 0 ; $i < $table->player_n ; $i++) { $bin5_user_cur = $bin5->user[$i]; $user_cur = $brisk->user[$table->player[$i]]; $bin5_user_cur->laccwr = $curtime; $bin5_user_cur->trans_step = $user_cur->step + 1; $bin5_user_cur->comm[$bin5_user_cur->step % COMM_N] = ""; $bin5_user_cur->step_inc(); $bin5_user_cur->comm[$bin5_user_cur->step % COMM_N] = show_table(&$bin5,&$bin5_user_cur,$bin5_user_cur->step+1,TRUE, FALSE); $bin5_user_cur->step_inc(); log_wr("TRY PRESAVE: ".$bin5_user_cur->step." TRANS STEP: ".$bin5_user_cur->trans_step); log_wr("Pre if!"); // ARRAY_POP DISABLED // // CHECK while (array_pop($user_cur->comm) != NULL); $user_cur->trans_step = $user_cur->step + 1; $user_cur->comm[$user_cur->step % COMM_N] = sprintf('gst.st_loc++; gst.st=%d; createCookie("table_idx", %d, 24*365, cookiepath); createCookie("table_token", "%s", 24*365, cookiepath); createCookie("lang", "%s", 24*365, cookiepath); xstm.stop(); window.onunload = null ; window.onbeforeunload = null ; document.location.assign("briskin5/index.php");|', $user_cur->step+1, $table_idx, $table_token, $G_lang); log_wr("TRANS ATTIVATO"); $user_cur->stat_set('table'); $user_cur->subst = 'asta'; $user_cur->laccwr = $curtime; $user_cur->step_inc(); } log_wr("presave bri"); $brisk->match_add($table_idx, $bin5); log_wr("postsave bri"); } // change room $brisk->room_sitdown($user, $table_idx); log_wr("MOP finish"); } else if ($argz[0] == 'logout') { $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= 'postact_logout();'; $user->the_end = TRUE; $user->step_inc(); } } /********************** * * * SUBST: sitdown * * * **********************/ else if ($user->subst == 'sitdown') { if ($argz[0] == 'wakeup') { $brisk->room_wakeup($user); } else if ($argz[0] == 'logout') { $brisk->room_wakeup($user); $user->comm[$user->step % COMM_N] = "gst.st = ".($user->step+1)."; "; $user->comm[$user->step % COMM_N] .= 'postact_logout();'; $user->the_end = TRUE; $user->step_inc(); } } } log_wr("before save data"); // Brisk::save_data($brisk); log_wr($user->step, 'index_wr.php: after save_data()'); /* Brisk::unlock_data($sem); */ /* exit; */ return (FALSE); } ?>